Showing posts with label level. Show all posts
Showing posts with label level. Show all posts

Sunday, February 8, 2015

Tool Review: Kobalt 0501856 Lighted Pocket Screwdriver with Level


Key Features:
 +   LED to illuminate screws
 +   pocket-sized
 -    Bits fall out too easily


The Kobalt Lighted Pocket Screwdriver with Level (model #0501856) is a neat little novelty tool, but probably not something you would carry with you every day and rely on.  It's a decent pocket screwdriver with a couple of extras thrown in.

The best feature of this screwdriver is the LED.  The LED illuminates the driver bit (and the screw) making it easier to see what you are doing in dark places.  There is a button to turn the LED on or off, located in a convenient spot for your thumb to reach when using the screwdriver.  The LED is bright enough to illuminate a couple of inches in front of the screwdriver, but not bright enough to use as a flashlight.

Two double-sided bits are included with this driver, a slotted bit (1/8 and 3/16) and a Phillips bit (#0 and #2).  Both bits are standard-sized hex bits.  The bits are strong enough and seem durable.

Both bits fit into storage slots inside the screwdriver's cap.  The plastic on the cap is very weak and easily reshaped, and it doesn't take long for it to flex enough for the bits to fall out.  So when you pull the cap off the driver, you have to be careful because the one or both of the bits might fall out.

The cap has a clip on it so you can attach it to a pocket.  The tool is about pen-sized, but a little thicker.  The tool has to be flat on its back side to use the level, but the level is raised so you can see it from the side.  Kobalt sells this tool with a lifetime guarantee.

If you use a pocket level such as the Irwin pocket level, this Kobalt driver/level might be a good substitute because it adds the screwdriver capability.  However, if you're looking to buy a pocket level to use often, you would probably be better off with something like the Johnson Keychain Level.  It's much smaller and costs less money.  If you like the Kobalt model, it is a pretty good value at around $3.  Similar pocket driver models typically sell for $5 to $10 on Amazon.

Monday, December 15, 2014

Tool Review: Stanley 42-240 Pro I-Beam Level

Key Features:
 +   Three bubbles so you can make easier checks
 +   Long reach allows for leveling multiple items together


A good level is an important part of any home tool kit. You could always go out and buy a cheap portable level, and for most jobs it would probably be sufficient, but the Stanley Pro I-Beam level (model #42-240) is well worth the $10 or $15 investment. It's a sturdy, reliable level that will provide accurate readings for a long time.

This level is long—24 inches—so unlike smaller levels it can be used to measure between two things on a wall, such as matching picture frames or two sides of a towel rack. That's a nice feature to have, and you often don't think about it until you need it. Although it's two feet long and made of metal, the level doesn't weigh a lot, so it can easily be carried around.

The level has three vials to test whether a surface is level or plumb. There is a horizontal level in the center and a vertical level on either side, so you can stand the level on an end and have a vial right there to check. There is also a slot cut into the top of the level so you can lay the level on its side in tight spaces and still be able to check the bubble.

The level is reliable in everyday use, and Stanley claims it's accurate to 0.0015 inches per inch (or 0.15 millimeters per meter), which seems very likely. You can easily check the accuracy of the two vertical levels because they both should give the same reading every time, and the horizontal vial can be checked like any vial by turning the level upside down and seeing if it shows the same reading.

In addition to working well, the level looks nice too. It has Stanley's traditional yellow-and-black coloring, and it is shaped like a long I-beam. There's a black plastic cap on either end to protect both the level and the surface you place the level on. The level has a durable aluminum construction and it holds up well over time.

Unlike many modern levels, the Stanley Pro I-Beam doesn't have a lot of fancy features or attachments. There's no pull-out tape measure or laser sighting, and it doesn't even have a magnet so you can stick it to a metal shelf. All it has are three accurate, reliable vials and a hole at one end to hang it from a nail or peg. With the Stanley Pro I-Beam, you won't be disappointed.

(Originally published on Helium.com, March 2013)

Saturday, November 29, 2014

Tool Review: Ultra Steel TR30206D Magnetic Pocket Level with Clip

You might have a heavy-duty foot-long level at home, one that you could brain a burglar with if you had to, but that level isn't the most practical tool to be carrying around with you everywhere you go. There are many different types of smaller, more portable levels.  One such portable level is the Ultra Steel magnetic pocket level with clip (model #TR30206D).

This plastic level (distributed in the USA; made in China) is compact and bright yellow, and it can fit in the palm of your hand. It is actually two levels in one, each set at 90 degrees from the other, and you can use them both for improved accuracy. The level is flat on two sides, so it will sit flush on any flat surface or in a 90-degree corner.

The level is small enough to fit in your pocket — about the size of a miniature stapler, a little larger than a stubby screwdriver. If you don't want to risk sitting on it and breaking it, however, it comes with a belt clip so you can attach it to your belt, toolbag strap, or the outside of your pocket. It also comes with a short ball chain so you could attach it to your key ring if you wanted to (though it's too big to carry it that way with much practicality).

Part of the underside of this level is magnetic, so you can stick it on your fridge or other metallic surface when it's not in use. It uses two straight magnets for added support, but the magnets are of varying strength. One of the magnets easily stuck to the tip of a screwdriver and clung there without dropping, while the other wouldn't even attach briefly before falling.

The Ultra Steel magnetic pocket level is probably not as reliable as a larger level from a more well-known company — it gave similar, but not identical, readings to a Stanley Pro I-Beam level — but it's a good value for a cheap, portable level.  This level gets 3 out of 5 stars.  It can be especially handy for someone who doesn't have a lot of room to carry around a larger level, but who may need to level something out from time to time.

This level sells for $1.00 in-store at Walmart. Online, it can be purchased from Amazon for $5.99.  It's very similar in appearance and features to the Stanley magnetic pocket level, which is listed at $16.38.

(Originally published on Helium.com, February 2013)

Ultra Steel tool reviews

Levels:
Ultra Steel TR30206D Magnetic Pocket Level with Clip

Screwdrivers:
- Ultra Steel TS90354J 4-in-1 Mini Screwdriver